Introduction

•DVI, HDMI and network signals sent via the [DVI OUT] port are displayed on the second display which has the DVI IN port.

AV IN [VIDEO]

Connect the [AV IN (VIDEO)] terminal of your monitor to the video output terminal of the external device using a VIDEO cable.

AUDIO OUT

Headphone/External speaker output terminal.

HDMI IN

Connect the HDMI terminal at the back of your PDP Display to the HDMI terminal of your digital output device using a HDMI cable.

Up to HDMI cable 1.2 can be supported.

BNC OUT [R, G, B, H, V] (BNC Terminal (Output))

BNC (Analog PC) Connection: connecting the R, G, B, H, V ports.

The number of PDP Displays that can be connected to the loopout depends on the cables, signal source, etc. With cables or signal source where there is no degradation, up to 10 PDP Displays can be connected (May not be supported depending on the connected cable).

BNC/COMPONENT IN [R/PR, G/Y, B/PB, H, V] (BNC/Component Connection Terminal (in- put))

-During BNC input, please check specifications for the input ports below.

•[R/PR] --> Red port input

•[G/Y] --> Green port input

•[B/PB] --> Blue port input

- During component input, please check specifications for the input ports below.

•[R/Y] --> Green port input