Adjusting the PDP Display
Name the input device connected to the input jacks to make your input source selection easier.
VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game / Camcorder / DVD Combo / DHR / PC
Note
•Set Edit Name to PC when a PC is connected via the HDMI or DVI port. In most other cases, set Edit Name to AV.
Note that Edit Name should be set to the connected source device if the source device's signal is 640 x 480, 720p (1280 x 720), or 1080p (1920 x 1080) because these signals are compatible with both AV and PC input.
•The Picture menu changes depending on the input signal and Edit Name.
Picture [PC / DVI / BNC Mode]
Available Modes
•
PC / DVI / BNC
•
AV
•
HDMI
•
Component
Note
•MagicInfo can only be enabled when a network box is connected.
•The HDMI port and network box cannot be connected at the same time.
MagicBright 
The MagicBright function is only enabled in PC mode. The function offers a picture that is twice as bright and vivid as conventional monitors so that users' various needs (to prepare documents, use the Internet, view videos, etc.) are satisfied.