Adjusting the PDP Display

The color tones can be changed.

1.Off2.Cool3.Normal4.Warm5.Custom

Note

If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp function is disabled.

If you set the Color Tone to Off, the Color Control function is disabled.

Color Control

Adjusts individual Red, Green, Blue color balance.

Note

If you adjust the picture by using the Color Control function, Color Tone will turn to the Custom mode.

Red

Green

Blue

Color Temp.

Color Temp. is a measure of the 'warmth' of the image colors.

Note

This function is only enabled if the Color Tone is set to Off.

Image Lock

Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitters and shakiness. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again.

Note

Available in PC mode only