Samsung P64FT PH64KRPMBF/EN, PH64KRPMBF/NG, PH64KRPMBF/XY, PH64KRRMBF/EN manual 33

Introduction

	PIP : Same as above
•	Nak
	Header	command			DATA	Ack/Nak	r-CMD		Val1		Check
				ID	Length
											Sum
	0xAA	0xFF			3	‘N’	0x3C		ERR
	ERR : Error code that shows what occurred error is
• Auto Adjustment Control (PC, BNC Only)
•	Function
	Personal Computer controls PC system screen automatically.
• Get Auto Adjustment Status
	None
•	Set Auto Adjustment
	Header		command			DATA		DATA
					ID	Length				CheckSum
	0xAA		0x3D			1		Auto Adjust-
								ment
	Auto Adjustment : 0x00 (Always)
•	Ack
	Header	command			DATA	Ack/Nak	r-CMD		Val1
					Length						Check
				ID
	0xAA	0xFF			3	‘A’	0x3D		Auto Ad-		Sum
									justment
•	Nak
	Header	command			DATA	Ack/Nak	r-CMD		Val1		Check
				ID	Length
											Sum
	0xAA	0xFF			3	‘N’	0x3D		ERR
	ERR : Error code that shows what occurred error is
• Video Wall Mode Control
•	Function
	Personal Computer converts Video Wall Mode of TV or Monitor when Video Wall is ON.
	Only works with TV or Monitor where Video Wall is on.