Samsung RSG309** user manual Check the amount of water supplied to the ice tray

Check the amount of water supplied to the ice tray.

1.Lift up the icemaker cover and gently pull it out.

2.When you press the Test button for 3 seconds, the ice cube container is filled with water from the water supply tap. Check to make sure the amount of water is correct (see the illustration below). If the water level is too low, the ice cubes will be small. This is a water pressure problem from within the main water pipes, not the refrigerator.

1
	Check the water
Ice maker	2 level
	Test button

-It will take a few minutes to reach the amount

CAUTION of water you want.

-Do not press the test button continuously when the tray is filled with ice or water. Water may overflow or ice jamming may occur.

-When the bucket is not installed, the ice maker does not work.

-When "Ice maker will not work when the ice bucket is not installed" message appears on the display panel, reinsert the bucket and/or make sure it’s installed properly.

p u 01setting

setting up _11