Samsung RSG309** user manual CHECKinG tHE wAtER DisPEnsER LinE, Installing the water line

When the door of the freezer is higher than the fridge

Insert a flat-blade screwdriver into a slot on the fridge leg, then turn it clockwise.

Connecting to the water supply line

1.First, shut off the main water supply line and turn the ice-maker off.

2.Locate the nearest cold, drinking water line.

3.After connecting the water supply with water filter, turn on water supply and Flush 3 gallons through filter before use (flush approximately 6 minutes).

p u

CHECKinG tHE wAtER DisPEnsER LinE

A water dispenser is one of the helpful features on your new Samsung Refrigerator. To help promote better health, the Samsung water filter removes unwanted particles from your water. However, it does not sterilize or destroy microorganisms. You may need to purchase a water purifying system to do that.

In order for the ice maker to operate properly, a water pressure of 20~125 psi (pound per square inch) is required. Under normal conditions, a 170 cc (5.75 oz.) paper cup can be filled in 10 seconds.

If the Refrigerator is installed in an area with low water pressure (below 20psi), you can install a booster pump to compensate for the low pressure.

Cold water	Water line installation
line	kit
Pipe clamp
Shut off valve

Installing the water line

Connecting the water line to the Refrigerator.

There are several items that you need to purchase to complete this connection. You may find these items sold as a kit at your local hardware store.

•	1/4” compression nut	•	plastic tubing
•	copper tubing	•	ferrule

01setting

Make sure the water storage tank inside the Refrigerator is properly filled. To do this, press the water dispenser lever until the water runs from the water outlet.

Refrigerator

Water line installation kits are available at extra cost from your dealer. We recommend using a water supply kit that contains copper tubing.

Check the accessory list below.

Plastic tubing (Assembled)

Ferrule (Not supplied)

Compression nut (1/4”)

(Assembled)

Compression

fitting

(Assembled)

Molded end(Bulb)

Compression nut (B) (1/4”) (Not supplied)

Hex wrench Clip

Copper tubing	or	Plastic tubing (B)
(Not supplied)		(Not supplied)

Household water supply line

setting up _09