3-26
E
3-25
Logo
●Displays the logo image set at the Setup ➔Layout ➔ScreenLook.
●Samsung electronics logo is set as the initial state.
●If the logo link is set, clink the logo image and the linked address screen will
be displayed.
Video Format
●Displays the information of the image format(MJPEG/MPEG4) that is being
shown.
●Display 704x576(PAL) or 704x480(NTSC), 640x480,
352x288(PAL) or 352x240(NTSC) as resolution.
❖Viewer Screen
❖Logo and Video Format
Logo
Video Format
Camera list
●The top item shows the log in camera, and the below items show the added
camera item in the Setup ➔ Basic Configuration ➔ Camera.
●The item that has the reversed character is selected by the correspond to the
camera that the image is being shown.
●If you choose the other camera in the list, the selected camera image will be
displayed.
Sequence Mode
●Sequence Mode that is set in the Setup ➔Basic Configuration ➔Camera will
be executed.
●If the Sequence Mode is being executed, the other buttons in the main page is
not-activated and can not be used. (Setup, the image screen adjustment
button that has been logged in is usable).
●Stopping the Sequence Mode, the camera that is being shown at the stop
●Sequence Mode function can be executed at both 1ch and 4 ch.
1ch/4ch
●The channel can be changed such as 1ch ➔ 4ch, 4ch ➔ 1ch.
●In case of 4ch, other buttons in the Main page is non-activated and cannot be
used. (Sequence Mode, Next Camera, Setup, About is available)
●In case of changing 4ch ➔ 1ch, Log in camera (address window IP camera)will
be selected.
❖Choice of camera and channel
Camera List
Sequence Mode
1ch/4ch
Next Camera