3-32
E
3-31
●Video Source : NTSC / PAL(Display the entered image of Camera.)
●Video Format : Support MJPEG / MPEG4
●Resolution
- 4CIF (NTSC: 704x480, PAL: 704x576)
- VGA (640x480)
- CIF (NTSC: 352x240, PAL: 352x288)
●Frame Rate
- CIF: Support up to 30 frames.
- 4CIF / VGA: Support up to 25 frames.
- Frame phase: 30fps(25fps) / 15fps / 5fps /1fps
●Quality : Able to select 5 phase (Very High / High / Normal / Low / Very Low)
of picture.
●Record
Enter the route to save.
●Screen Capture
Enter the route to capture the screen. (Select the format to save: JPEG,
BMP)
NN
NNoo
oott
ttee
ee- When changing the Resolution, Codec, reboot the encoder so it will
take time to display the image.
- Frame rate is subjected to adjust by the number of access, network
environment; the frame rate can be less than the user set the frame
rate.
●Setting the connection
Select the setting value according to the user’s network environment
camera installed.
If the setting is different with the actual installed network environment, the
image cannot display smoothly.
<Select setting according to the network environment>
1. If the camera is installed over the internet using Static IP
- Select IP Type as Static IP.
- If the camera is installed over LAN using static IP, select the connection
type as LAN.
- If the camera is installed directly over the ADSL modem using static IP,
select connection type as ADSL Modem.
- If the camera is connected to the static IP through IP router, select IP
Router + LAN or IP Router +ADSL/Cable.
IP