Samsung SCC-C6475(P) 3. PRESET

4-15

E

FOCUS MODE

In the FOCUS MODE MENU, the Focus method can be set to AF, MF, or ONEAF.

- AF : With AUTO FOCUS MODE, you can monitor the screen continuously

and it will focus automatically. While moving the zoom keys, it will

automatically focus so FOCUS key input is not necessary.

- MF : In MANUAL FOCUS MODE the user adjusts the Focus manually.

- ONEAF : The ONEAF Mode performs Auto-focusing only when the SCC-C6475(P)

stops after moving and when the SCC-C6475(P) is not moving it is same

as MF mode.

(The ONEAF Mode does not work when zooming out.

❈

When in the MF/ONEAF Mode, press the NEAR and FAR keys on the

Controller (SSC-1000/SSC-2000) at the same time to perform AUTO

FOCUS.)

Use the left/right keys to select AF, MF or ONEAF in the FOCUS MODE menu.

(VIDEO SET)

IRIS ALC...

SHUTTER

OFF

AGC

OFF

WHITE BAL ATW1

DIS OFF

FOCUS MODE AF

SPECIAL ...

EXIT QUIT

SPECIAL

You may control DETAIL by yourself in the SPECIAL menu.

- DETAIL : Controls both horizontal and vertical distinction.

➜

Press

[Enter]

(VIDEO SET)

IRIS ALC...

SHUTTER

OFF

AGC

LOW

WHITE BAL ATW1

DIS ON

FOCUS MODE AF

SPECIAL ...

EXIT QUIT

(SPECIAL)

DETAIL (0) -- I --

RET

EXIT

It's the same as the EXIT function of the CAMERA SET menu.

4-14

3. PRESET

This is the menu that user sets the PAN/TILT location, Zoom/Focus, and

screen condition, so the camera can monitor the presetting area on

demand. A total of 128 presets are available.

Among the 128 PRESETS, PRESET 1: ALARM1, PRESET 2: ALARM2,

PRESET 3: ALARM3, PRESET 4: ALARM4,PRESET 5: set as special

preset corresponding MOTION.

➜

Press

[Enter]

➜

Press

[Enter]

* * MAIN MENU * *

CAMERA SET...

VIDEO SET...

PRESET ...

ZONE SET...

AUTO SET...

ALARM SET...

OTHER SET...

SYSTEM INFO...

(PRESET MAP)

0 1 2 3 4

5 6 7 8 9

10 11 12 13 14

15 16 17 18 19

20 21 22 23 24

25 26 27 28 29

30 31

î ï

RET

ID:PRESET 0

PRESET NO.0

POSITION SET ...

PRESET ID ON...

VIDEO SET OFF

PRESET SPEED 8

DWELL TIME 3S

IMAGE HOLD OFF

EXIT QUIT

❈

Set the PRESET position at the TILT which ranges from 0°to 90°. Beyond

this range, PRESET setup is not available.

❈

When you try to set the Preset position by using the Controller(SSC-1000

or SSC-2000) beyound the range of TILT 90°, the text, “SET AGAIN” will

be displayed. In such a case, please retry in the area below TILT 90°.

Contents

Main Important Safety Instructions Safety Precautions Warning Caution FCC STATEMENT Before Usage Table of contents Chapter 4 Setup Menu Overview Before Usage Chapter 1 SCC-C6475(P) Overview Chapter 3 Network Manual Overview Chapter 2 SCC-C6475(P) Installation Chapter 1 SCC-C6475(P) Overview Appendix Installing the IP router Product specifications Locations of Control SCC-C6475(P) Introduction ADAPTER CONNECTION SCC-C6475(P) Adapter BOARD Camera Holder Setting RS-422A/RS-485 termination INITIAL SETTING Chapter 2 SCC-C6475(P) Installation Factory Default Power Adapter Cable Video Cable Preparing the Cables Before Installing Checking Package Contents Installing SCC-C6475(P) Cable Connection Installation Precautions Separately Sold Products for Installation Page Installing the Camera Chapter 3. Network Manual Overview CC oonn iioo 1. Connecting SCC-C6475(P) Network 1) In case of using xDSL/Cable Internet network and IP router Page In case of connecting more than 2 cameras to one IP router In case of connecting more than 2 cameras to an IP router 2) In case of using the LAN and IP router In case of connecting more than 2 cameras to one IP router Page In case of connecting more than 2 cameras to an IP router 3) In case of connecting the camera to the xDSL/Cable internet network Page Page 4) In case of connecting the camera in the intranet (LAN) 2. Setting the IP 3. Log In. 4. Main Screen Logo Video Format IP ee- When changing the Resolution, Codec, reboot the encoder so it will User Camera Log In Camera Camera List Insert / Modify Delete IP Filter Log Software Update Reset Parameter Overlay Image Overlay Text Screen Look View HTML Code Transfer Setup Alarm Setup I/O Port Network eeIP Notification 6. Network Terms Definition Chapter 4 Setup Menu Overview Structure of the Setup Menu 1. CAMERA SET MENU CAMERA ID nnCAMERA ID OSD is not displayed in the network viewer. V-SYNC COLOR/BW MOTION DET DIGITAL ZOOM ZOOM SPEED ALC 2. VIDEO SET MENU IRIS SHUTTER AGC MOTION WHITE BAL DIS FOCUS MODE SPECIAL 3. PRESET POSITION SET PRESET ID nnPRESET ID OSD is not displayed in the network viewer. VIDEO SET 4. ZONE SET PRIVACY ZONE BLANK ALL BELOW PRYVACY ZONE MAP BLANK ALL ABOVE SET ZONE AREA REVERSE ZONE DIR SET/ZONE AREA SET SET ZOOM nnZONE DIR/AREA OSD is not displayed in the network viewer. ZONE DIR SET 5. AUTO SET START SET END SET DIRECTION ENDLESS SPEED DWELL TIME PATTERN 6. ALARM SET ALARM PRIORITY SET ALARM IN SET ALARM OUT SET 7. OTHER SET PROPORTIONAL P/T AUTO SET AUX OUT CONTROL TURBO P/T 8. SYSTEM INFO Press [Enter] 9. SHORT KEYS SSC-1000 or SSC-2000 Controller supports the following short keys. Function Key Appendix Linksys (Model : WRT54G) Netgear (Model : RP614v2) D-Link (Model : DI-624+) Installing the IP router Setting the IP sharing setting Example (Linksys model WRT54G) 2. Connecting the Internet 1. LOGIN 3. Set the Time zone 4. Verify the Connection state. 5. Port Forwarding (Be sure to read this.) Setting the IP router Example (Netgear model RP614v2) 1. Access 2. Setting the internet connection 3. Verify the connection status. 4. Port Forwarding (Be sure to read this.) Setting IP router Example (D-Link model DI-624+) 1. Access 2. Run Wizard Page 7. Wireless LAN 8. Encryption 9. Restart 10. Checking the Connection 11. Port Forwarding (Be sure to read.) 5-19 5-18 SCC-C6475(P) Product specifications SCC-C6475 Cautions Correct Disposal of This Product (Waste Electrical & Electronic Equipment)