Installing Printer Software in Windows

8

Installing Software for Network

Printing

When you connect y our printer to a network, you must first
configure the TCP/IP settings fo r the printer. After you hav e
assigned and verified the TCP/IP settings, you are ready to
install the software on each comp uter on the network.
You can install the printer softw are using the typical or custo m
method.

Typical Installation

This is recommended for most users. All components necessary
for printer operations will be installed.
1
Make sure that the printer is connected to your network
and powered on. For details about connecting to the
network, see the supplied pr inter’s User’ s Guide.
2
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click
Start
and
then
Run
. Type
X:\Setup.exe
, replacing “
X
” with the
letter which represents y our drive and click
OK
.
If you use Windows vista, W indows 7 and Windows Server
2008 R2, click
Start
All programs
Accessories
Run
, and type
X:\Setup.exe
.
If the
AutoPlay
window appears in Windows vista,
Windows 7 and W indo ws Server 20 08 R2, click
Run
Setup.exe
in
Install or run program
field, and click
Continue
in the
User Account Control
window.
3
Click
Next
.
• If necessary, select a language from the drop-down list.
4
Select
Typical install ation for a netw ork pr inte r
. Click
Next
.
NOTE
: If your printer is not connected to the network, the
following window will appear. Select a setup option you want,
click
Next
.
Then the
Set IP Address
window appears. Do as follows:
1.Select a printer to be set with a sp ecific IP add ress from the
list.