cLower the door onto the hinges.
CAUTION: To avoid damaging the door, check that both of the door hinges are properly seated onto the hinge pins.
2To install an inlay:a If necessary, place the door on its hinges as described in step 1. b Close the door.
c On the outside of the door:
CAUTION: To avoid damaging the inlay, do not hold or pull out the inlay more than 2.54 cm (1 inch) away from the door.
aTo vertically position the inlay with the door, align the top row of snap studs (F) on the inlay with the top row of holes (G) in the door.
bLower the inlay onto the door just to the left of the slots (E), while maintaining the vertical alignment.
cSlide the inlay toward the front of the chassis, inserting the three tabs (D) on the inlay into the slots (E) in the door.
FE
F
F
D 
G G G
Upgrading and Servicing Guide 9