HP Blackbird 002-01A Gaming System, Blackbird 002-21A Gaming System Installing a memory module

Models: Blackbird 002-01A Gaming System Blackbird 002-21A Gaming System

1 58
Download 58 pages 36.81 Kb
Page 41
Image 41

4Push down the retaining clip on each end of the memory socket until the memory module pops out of the socket.

WARNING: Do not pull the memory module out of the memory socket. Use the retaining clips to remove the module.

5Lift the memory module out of the memory socket.

Installing a memory module

Upgrade the memory in your computer with memory modules of the same type and speed as the memory modules originally installed in your computer.

CAUTION: When handling a memory module, be careful not to touch any of the contacts. Doing so may damage the module.

WARNING: If the module has extended heatsink fins, do not grip the module by the fins.

1Open both retaining clips of the memory module socket:

If you are replacing an existing memory module, install the new memory module in the same memory slot from which you removed one.

Or

If you are adding a memory module, note that for this dual-channel configuration, the total capacity (size) of the memory modules in the (A) channel slots must match the capacity of the modules in the (B) channel slots. Install the new modules so that the two channels match.

A

B

Upgrading and Servicing Guide 37

Page 41
Image 41
HP Blackbird 002-01A Gaming System, Blackbird 002-21A Gaming System manual Installing a memory module