4To install an inlay:
a To vertically position the inlay with the panel, align the top row of snap studs (Q) on the inlay with the top row of holes (R) in the panel.
b Lower the inlay onto the panel just to the right of the slots (T), while maintaining the vertical position.
c Slide the inlay toward the front of the chassis inserting the three tabs (S) on the inlay into the slots (T) in the panel.
QT
Q
Q 
S
R R R
CAUTION: To avoid damaging the inlay, do not hold or pull out the inlay more than 2.54 cm (1 inch) away from the panel.
