HP Blackbird 002-21A Gaming System, Blackbird 002-01A Gaming System Upgrading and Servicing Guide

cOn the outside of the door, do the following:

CAUTION: To avoid damaging the inlay, do not pull out the inlay more than 2.54 cm (1 inch) away from the door.

aSlowly pull out the square-cornered edge of the inlay (C, near the rear of the chassis) to free the three snaps along the left side of the inlay.

bContinue to slowly pull out the edge of the inlay to free the two columns of three snaps located on each side of the middle of the inlay.

cHolding the inlay near to the door, slide it toward the back of the chassis to free it.

dSet the inlay aside.

C

To install the inlay, see “Replacing the access door” on page 8.

6Upgrading and Servicing Guide