SHR-2040/2041/2042 USER’S MANUAL

3Connecting the USB

1.There are two USB connecting ports on the front and back of SHR-2040/2041/2042.

2.USB Hard Disk, USB CD/DVD, and USB Memory are connected through the front and back ports of SHR-2040/2041/2042.

3.Only one USB device can be connected with each USB connecting port.

4.If the USB HDD is connected to the system, it should be detected and set through Menu - System - HDD setup before the operation.

5.It supplies the function of HOT PLUG, which connects/removes the USB device, during the system operation.

Note

See 5-8 System (HDD Setup) of User’s Manual.

Caution

-Wait until the USB device connected by hot plug is stabilized enough and click CONNECT in SHR-2040 / 2041 / 2042 MENU before use.

-USB port on the front and back of SHR-2040/2041/2042 cannot be connected to same kinds of USB device. (For example, the case is that 2 CD-RW devices or 2 USB Memories are used by connection with the front and back of system.)

-If you use the USB Memory on SHR-2040/2041/2042, it should be composed of the format being supported by SHR-2040/2041/2042. Although you format it with FAT32 format on PC, it will be re-formatted, in case of (when) connecting with SHR- 2040/2041/2042.

Caution

- The hard disk of USB device should be set to Master.

3-5

Page 34
Image 34
Samsung SHR-2040PX, SHR-2042P, SHR-2040P/XEC manual 3Connecting the USB