8Network

IP Setup

Connection Mode

Designates the kind of the network connected to the main body of SHR-2040/2041/2042.

Static IP

: When the main body is connected to the network with Static IP.

Dynamic IP

: When the main body is connected to the network with Dynamic IP supplied

 

by DHCP.

ADSL(PPPoE) : When the main body is connected to the ADSL network with PPPoE.

Bandwidth

Designates the network speed to which the main body of SHR-2040/2041/2042 is connected.

Unlimited / 2 Mbps / 1 Mbps / 600 Kbps / 300 Kbps

In case of ADSL, the bandwidth should be selected 600 Kbps or 300 Kbps.

Caution

When the main body is connected to the network using high speed LAN, set to 1 Mbps or 2 Mbps. When the main body is connected to the network supporting low bandwidth such as ADSL, set below 600 Kbps. If you set Bandwidth high though the main body is connected to a slow network, the network load will get heavy therefore the connection with Smart Viewer or video monitoring may be instable.

Note

In case of ADSL, the Protocol type is fixed to TCP.

Admin Password

Used for the connection between Smart Viewer and the set with the authority of Admin. The password can be input 8 digits in maximum.

Press "Enter" and the left numeric keys from 1 to 4 for setup. The default password for ADMIN is 4321.

User Password

Used for the connection between Smart Viewer and the set with the authority of user. The password can be input 8 digits in maximum.

Press "Enter" and the left numeric keys from 1 to 4 for setup. The default password for USER is 4321.

5-28

Page 75
Image 75
Samsung SHR-2040P/XEC, SHR-2042P, SHR-2040PX manual 8Network, IP Setup