DIGITAL VIDEO RECORDER
GB |
|
| GB |
| 2 | ||
1 |
| ||
| Introduction | Characteristics |
The Digital Video Recorder
■Upon booting the system, it recognizes automatically whether the incoming signal is NTSC or PAL signal.
■Adjusting screen quality in
●Very High, High, Normal, Low
■Variously changing numbers of recording fields per second.
●NTSC: 60 ~ 0.50 Fields/sec
●PAL: 50 ~ 0.50 Fields/sec
■Simultaneous recording and regeneration
■Reservation recording by using timers
■Recording by alarm
■Motion detection function and alarm occurrence or recording available in motion detection
■Multiplexer link
■Various regeneration speed
●Frame Advance by Jog
●1/5, 1/2, 1, 2, 5, 10, 20 baud rate (forward, backward)
■Convenient retrieval function
●Date & Time Search, Alarm Event Search, Record Event Search
■Convenient operation by using Jog/Shttle
■Remote monitoring and control via LAN
●Network Interface: Ethernet (10/100BaseT)
●Protocol: TCP/IP
●Web Server: Image capture and remote monitoring through a Viewer Program installed at
PC
■Automatic booting of system in power failure recovery during recording mode, and starting of recording
■Remote control by series communication
●RS232 1 port
●RS485 2 ports (connection of up to 32 sets)
●Camera PAN/TILT/ZOOM Control of LAN VIEWER PROGRAM via Controlling
■The recorded state and remnant hard disk space are displayed as bars on the screen and especially in the play mode, the part currently being played of the total hard disk capacity is displayed in the bar.
■You can record video and audio at the same time.
■Besides English,
■You can back up data with SCSI.
■You can control the camera and select channels with the Remote Viewer Program. (For SAMSUNG model