Samsung SHR-3010 user manual 1Basic Record, ② Record Stop ① Current Image Record

DIGITAL VIDEO RECORDER

GB GB

1Basic Record

Basic Record		② RECORD STOP
① CURRENT IMAGE RECORD		Press the STOP(■ ) button for 3 seconds to stop recording. Then, the light will go off in
		the RECORD(●) button and recording will stop with the following message on the
Press the RECORD(●) button to record current image. If doing so, the light of the
		bottom of the screen.
RECORD(●) button turns on and record starts while following message appears on the
screen. Settings related with record are done in the RECORD MODE SETUP menu.
1	2001-08-22 18:19:12	1	2001-08-22 18:19:12
			O RECORD OFF O
	O RECORD ON O

Note
- Recording is possible both when the system is in the Live screen mode or in the			Note
playback mode. However, whereas the Live screen currently showing will be
recorded when the system is in the Live screen mode, the video that is currently			Menu screen will not be displayed even if the MENU button is pressed during recording. If
being input separate from the screen currently being played will be recorded when
the system is in the playback mode.			the MENU button is pressed during the recording, the following message will appear. To view
- While the user is in the menu, pressing the RECORD(●) button will not start the			the menu screen, the recording must be stopped.
recording. To start the recording, first exit the menu.
If the incoming video signal is disconnected during recording, recording will be stopped.			1			2001-08-22 18:19:12
But, if the incoming video signal is reconnected, the system recognizes this and start to				O	PLEASE STOP RECORD O
record again. In addition, when pressing RECORD(●) button without connecting any video
signals to the input port, the following Message is shown on the screen and the system will
not carry out the recording function.
1		2001-08-22 18:19:12
	O	NO VIDEO INPUT O

4-1 4-2