52_ Smart Viewer
Network
You can configure the network-related settings.
For more details, see Chapter 5, “Menu Setup.”
- Network Password
You can set both Admin password and user
password for connecting to the DVR system
through the network using Smart Viewer.
CAUTION
For the network password, you can
input numeric values only up to 8
digits.
If you leave the password blank
and apply it, a warning message
appears to ask you to retype it.
The Delete key and key combinations
like CTRL+C and CTRL+V in the
keyboard are not supported for input of
password.
For deletion of any input value, use the
BACKSPACE key.
The default Admin password is “4321.”
The default user password is also
“4321.”
- IP Settings
It configures the network IP settings for the
DVR.
CAUTION
Be sure to inquire of the network
manager about the settings.
Both ADSL ID and password can
be input up to 40 letters including
alphabets, numbers, and special
characters.
- Transfer Protocol Settings
You can change the transfer protocol-related
settings
- Callback Settings
You can configure the callback-related
settings for DVR.
- Picture Settings
This configuration is used to set the video
size and quality for transferring pictures.
SHR-5162_Eng.indb 52 2007-06-18 ソタタ・11:49:48