Samsung SHR-5082 Remote Mode, Calendar Window, Audio Volume, Video Brightness/ Contrast Buttons

Remote Mode

This mode transfers the video data recorded on DVR through the network for playback. Up to 4 channels are allowed for simultaneous search and playback. The video data is played at the position where the time bar is located.

When clicking this button, it changes to the Remote mode.

Calendar Window

If the video data has been recorded on a date, the date is distinguished in red. If you click the date, the recorded video information is displayed in the time line. If you select a date, it turns thick red. Clicking  changes to the previous month and clicking  changes to the next month.

Audio Volume, Video Brightness/ Contrast Buttons

Those buttons operate the same as the controls in Monitoring Mode. The brightness and contrast adjustment may not work depending on the model.

Screen Split Selection Buttons

You can use any of full screen, single, quad (4-split), 9-split, and 16-split modes.

In the Remote mode, 9-split mode is not available while in the Local mode, quad and 9-split modes are not available.

Video Save (Backup)/Video Conversion/Print/Setup

1 2 3 4

1.Video Save button

During playback (play/reverse play/fast forward/fast backward), if you select a channel and click this button, the video data is saved in a DVR file. (It is saved in the designated folder on your PC.)

The directory, file naming convention, and recording time can be configured in Viewer Setup for Setup Mode. You can set the recording duration ranging from one minute to 10 minutes. To stop recording, click this button again. But this action is possible in 10 seconds after the recording starts.

If the video file is not playing, this button enables you to perform backup, which brings up the following window.

You can set the starting and ending times for backup and select a file format for saving. Clicking Start begins the backup process. The backup file is saved in the folder which was defined by Setup > Viewer Setup > Video Recording > Video Location.

To stop the backup process, click Stop.

This function is enabled only when the playback actions are in progress.

Smart Viewer _65

10 Smart Viewer

SHR-5162_Eng.indb 65 2007-06-18 ｿﾀﾀ・11:50:21