Monitoring Mode, Connection Failure Cases | Samsung SHR-5082

If a DVR is not connected to Smart Viewer, it is displayed in gray and “Not Connected” appears in the Status column.

For software upgrade, click the following button to open the DVR firmware file.

5162/5082

5162/5082

After selecting a firmware file, click Open and select Upgrade.

The progress of the upgrade is displayed at the bottom of the screen.

Smart Viewer enables you to extract the menu settings for the connected DVR. After selecting a DVR, click Export.

The DVR settings are stored into a data file (*.dat).

By clicking Import, the stored data file can be copied to your DVR to recover the settings.

If you want to recover the network settings also, check the following check box.

Be sure to stop all the DVR

	CAUTION	operations such as recording, Menu
	CAUTION	setup, backup, and playback before
		setup, backup, and playback before
		upgrading the DVR software.

During the software upgrade, don’t turn off the power of DVR. The software upgrade takes about 5 minutes.

If the software upgrade is accidentally suspended, the previous software is left intact.

You can download the upgraded DVR firmware from the CCTV part at www. samsung.com.

MONITORING MODE

To connect a DVR or site, select a DVR or site from the list and click the connection button as shown in the picture.

For this connection, you should have set the DVR information such as name, IP, and password in the Setup Mode. If you select a site, it enables connection to multiple DVRs contained in the site.

Connection Failure Cases

1.Password certification failure

Smart Viewer _57

10 Smart Viewer

SHR-5162_Eng.indb 57	2007-06-18 ｿﾀﾀ・11:50:00

Image 61

Samsung SHR-5082 Monitoring Mode, Connection Failure Cases, Upgrading the DVR software, Password certification failure

Contents

Real Time DVR WHAT’S Included with Your DVR Key features of your DVR Safety regulations Operating Temperature BatteryBefore start Standards Approvals Contents Search and Play Controls on the DVR Introducing your real time DVR Fast/Step Rewind Button Power LEDStop Button PLAY/PAUSE Button Rear Rear Panel Jacks Press the 1 to 9 button respectively Remote ControlRelease, and wait 3 seconds FR fast rewind FR fast reverse Used for Changing the Remote Control ID Checking Installation Environment InstallationHDD Addition Setting the jumper Things to consider when adding a hard diskHow to add hard disks Slave Screwdriver Bracket Hddb Hdda BRACKET-HDDB Connecting VIDEO, AUDIO, and Monitor Connecting the Network Connecting with other devicesConnecting to Internet through Ethernet 10/100BaseT Illustrations are described based on SHR-5162 Connecting the Alarm INPUT/OUTPUT Connecting the USBConnecting to Internet through Adsl  5082 Alarm IN/OUT Ports  5162 Alarm IN/OUT Ports Connecting the RS-485 Device Live Live Screen ModeOperating the System Live screen icons Live screen modes Selecting live screen mode Setting Audio ON/OFFAudio On/Off setting in full screen mode Audio On/Off setting in 16-split mode Event Monitoring Freezing and ZoomingFreeze function Zoom function SPOT-OUT Monitoring Fan Information Error occurs in the fan Refer to the manual Date/Time/Language Setup Menu setupBefore USE System Password System Log Load Factory DefaultEvent Log Storage Setup System Information and Setup Remote Control Device Export/Import the Configuration Camera Camera Configuration Monitoring Screen SetupPTZ Device Record Quality & Auto Deletion Record Mode Event Record Duration Record Rate & Video Size Alarm Detection Setup Event Record ModeMotion Detection Setup Schedule Video Loss Detection SetupRecord Schedule IP Settings Alarm Out ScheduleNetwork Transfer Protocol Settings Transfer Picture Settings Callback SettingsCallback Settings Transfer Picture Settings Port configuration for connecting Smart Viewer Configuring Network Poor image problem in Smart Viewer Case of TCP transfer protocol To configure the related settings BackupBackup PTZ camera control PTZ Camera Control ModeBasic PTZ Operations Camera Menu Setup Preset SetupTo set a preset Other View Preset ViewSamsung Pan REC Normal Recording RecordingRecord Schedule Calendar Search Search and playEvent Search To perform a calendar search GO to First Search Date Time SearchTo perform an event search To perform a date/time search Backup Search Can Select Backup SearchGO to Last Search Playback  Speed play  Playback mode Viewing still images  Audio playback PC Specification Recommended Main FeaturesSmart Viewer Introduction Execution This button is used for connecting to Callback Setup ModeThis screen shows the monitoring sites  Setup Item Selection buttons DVR Setup Save/Cancellation of Revised Information  Closing the setup window User Password For more details, see , Menu Setup Admin Password  Camera Camera Configuration Only English is available for the title Retype it  Recording  Monitoring Setup  Schedule  For the network password, you can Network Password Network Viewer Setup You can set the language to be displayed on Smart Viewer Site Setup DVR List If you really want to modify the DVR, disconnect Smart Viewer, the following message appearsDVR and retry to modify it  Site List To edit the DVR, go to the DVR list VersionTo add a DVR to the site, select a DVR and click Add Password certification failure Monitoring ModeConnection Failure Cases Upgrading the DVR software Connection Screen Mode Conversion ButtonTime Information Connection Information Event Log Display Window  Time Change When the date and time of the DVR are changedClick Log to activate the log display window  Black When Smart Viewer cannot be connected to a DVR Sequence Mode ButtonCamera Connection Indication Window Screen Split Selection Buttons Callback Button Next ButtonFavorite Button Video Recording Button Video Brightness/Contrast Control Button Audio Volume Control ButtonPTZ Camera Control Buttons  The other cameras do not support those functions Self Menu Setup of PTZ device Search Mode Audio Volume, Video Brightness/ Contrast Buttons Remote ModeVideo Save Backup/Video Conversion/Print/Setup Calendar Window Viewer Setup File Converting AVI Location Print button Viewer Setup File Converting Jpeg LocationSetup Mode button File Conversion button Time Line Local ModeReload button It renews the recording time information Appendix Product Specification True Recording ips 0.938/1.875/3.75/7.5/15/30ips Video MPEG4True Recording ips 0.781/1.563/3.125/6.25/12.5/25i 15ipsNTSC/12.5ipsPAL 5ipsNTSC/6.2ipsPAL Triplex 16 split  15 Channel Live +1Channel PB  5082 Outline Drawings Outline Drawings  5162 Outline Drawings Classification Detailed Items Factory Setup Factory Default CH1 Retry On / OffOff  If you forget the password, you shall reset the DVR to Troubleshooting FAQ If all your efforts as above end up with nothing, check Works for the shop where you bought the product DVR has problem. DVR will not work in order to protect When you use DHCP/ADSLPPPoE for connection  Check if 3 Smart Viewer users are in connection with  Make sure that the external storage device installed is  Make sure that the additional external HDD installed Preamble Open Source License Report on the Product Appendix No Warranty Repair or Correction How to Apply These Terms to Your New Programs We protect your rights with a two-step method You must cause the whole of the work to SHR-5162Eng.indb 2007-06-18 ｿﾀﾀ・115043 Executable Foundation How to Apply These Terms to Your New LibrariesLicense, or at your option any later version Loss of USE, DATA, or Profits or Business Interruption OpenSSL License This Software is Provided by Eric Young ‘‘AS IS’’