SPOT-OUT Monitoring | Samsung SHR-5082, SHR-5162 specs

SPOT-OUT MONITORING

Spot-out monitoring has nothing to do with the live screen output. It monitors a specific channel in full screen. After selecting Monitoring on the MENU, you can select a channel for monitoring in Spot Out Channel. You can also monitor all the channels at an interval of auto sequence time.

In case of spot-out monitoring, the live screen icons do not appear.

If the Spot Out Event Monitor is set to On, you can see the event channels.

When the events occur sequentially, the channel of the camera that the last event has been issued is displayed. (In case of alarms, multiple channels are enabled.)

When multiple cameras are connected, the camera with the smallest number is output on Spot-out channel.

In the live screen, you can select a spot- out channel as described below:

Press the STOP button on the front panel or remote control and press a button out of 16 channels. The selected channel is set to a spot-out channel.

When you press the STOP button and then the MODE button within 2 seconds, the spot-out channel mode is changed to the change screen mode.

If the built-in HDD is not connected

	CAUTION	or it is out of order, the system
	CAUTION	displays an error ( ) saying “built-
		displays an error ( ) saying “built-
		in HDD error” at the top-left corner.
		In this case, you cannot perform
		recording, playback, and backup.
		So please contact the service
		personnel.

If the fans in the product do not properly operate or have some problem, the fan error message appears on the live screen as shown in the following picture. In this case, check whether the fans normally run or not. When the fans are recovered, the Failure icon (

) that is displayed at the top- left corner disappears. In case of a fan failure, it can shorten the life of the product so please contact the service personnel.

Fan Information

A error occurs in the fan.

Refer to the manual.

live _19

04 LIVE

SHR-5162_Eng.indb 19	2007-06-18 ｿﾀﾀ・11:48:06

Image 23

Samsung SHR-5082, SHR-5162 user manual SPOT-OUT Monitoring, Fan Information Error occurs in the fan Refer to the manual

Contents

Real Time DVR WHAT’S Included with Your DVR Key features of your DVR Safety regulations Standards Approvals BatteryOperating Temperature Before start Contents Search and Play Controls on the DVR Introducing your real time DVR PLAY/PAUSE Button Power LEDFast/Step Rewind Button Stop Button Rear Rear Panel Jacks FR fast rewind FR fast reverse Used for Remote ControlPress the 1 to 9 button respectively Release, and wait 3 seconds Changing the Remote Control ID HDD Addition InstallationChecking Installation Environment Slave Things to consider when adding a hard diskSetting the jumper How to add hard disks Screwdriver Bracket Hddb Hdda BRACKET-HDDB Illustrations are described based on SHR-5162 Connecting with other devicesConnecting VIDEO, AUDIO, and Monitor Connecting the Network Connecting to Internet through Ethernet 10/100BaseT  5082 Alarm IN/OUT Ports  5162 Alarm IN/OUT Ports Connecting the USBConnecting the Alarm INPUT/OUTPUT Connecting to Internet through Adsl Connecting the RS-485 Device Live screen icons Live Screen ModeLive Operating the System Live screen modes Audio On/Off setting in 16-split mode Setting Audio ON/OFFSelecting live screen mode Audio On/Off setting in full screen mode Zoom function Freezing and ZoomingEvent Monitoring Freeze function SPOT-OUT Monitoring Fan Information Error occurs in the fan Refer to the manual System Menu setupDate/Time/Language Setup Before USE Password Event Log Load Factory DefaultSystem Log Storage Setup System Information and Setup Remote Control Device Export/Import the Configuration Camera Camera Configuration PTZ Device Screen SetupMonitoring Record Quality & Auto Deletion Record Mode Event Record Duration Record Rate & Video Size Motion Detection Setup Event Record ModeAlarm Detection Setup Record Schedule Video Loss Detection SetupSchedule Network Alarm Out ScheduleIP Settings Transfer Protocol Settings Transfer Picture Settings Callback SettingsTransfer Picture Settings Callback Settings Case of TCP transfer protocol Configuring NetworkPort configuration for connecting Smart Viewer  Poor image problem in Smart Viewer Backup BackupTo configure the related settings Basic PTZ Operations PTZ Camera Control ModePTZ camera control To set a preset Preset SetupCamera Menu Setup Pan Preset ViewOther View Samsung Record Schedule RecordingREC Normal Recording To perform a calendar search Search and playCalendar Search Event Search To perform a date/time search Date Time SearchGO to First Search To perform an event search Playback Backup SearchBackup Search Can Select GO to Last Search  Audio playback  Playback mode Speed play  Viewing still images Introduction Main FeaturesPC Specification Recommended Smart Viewer Execution This screen shows the monitoring sites Setup ModeThis button is used for connecting to Callback  Closing the setup window DVR Setup Setup Item Selection buttons  Save/Cancellation of Revised Information User Password For more details, see , Menu Setup Admin Password Retype it Camera Configuration Camera  Only English is available for the title  Recording  Monitoring Setup  Schedule  Network Network Password For the network password, you can Viewer Setup  DVR List Site SetupYou can set the language to be displayed on Smart Viewer  Site List Smart Viewer, the following message appearsIf you really want to modify the DVR, disconnect DVR and retry to modify it To add a DVR to the site, select a DVR and click Add VersionTo edit the DVR, go to the DVR list Upgrading the DVR software Monitoring ModePassword certification failure Connection Failure Cases Connection Information Mode Conversion ButtonConnection Screen Time Information Click Log to activate the log display window  Time Change When the date and time of the DVR are changedEvent Log Display Window Screen Split Selection Buttons Sequence Mode Button Black When Smart Viewer cannot be connected to a DVR Camera Connection Indication Window Video Recording Button Next ButtonCallback Button Favorite Button PTZ Camera Control Buttons Audio Volume Control ButtonVideo Brightness/Contrast Control Button  The other cameras do not support those functions Self Menu Setup of PTZ device Search Mode Calendar Window Remote ModeAudio Volume, Video Brightness/ Contrast Buttons Video Save Backup/Video Conversion/Print/Setup File Conversion button Viewer Setup File Converting Jpeg LocationViewer Setup File Converting AVI Location Print button Setup Mode button It renews the recording time information Local ModeTime Line Reload button Appendix Product Specification 15ipsNTSC/12.5ipsPAL 5ipsNTSC/6.2ipsPAL Video MPEG4True Recording ips 0.938/1.875/3.75/7.5/15/30ips True Recording ips 0.781/1.563/3.125/6.25/12.5/25i Triplex 16 split  15 Channel Live +1Channel PB  5082 Outline Drawings Outline Drawings  5162 Outline Drawings Classification Detailed Items Factory Setup Factory Default CH1 Off On / OffRetry  If all your efforts as above end up with nothing, check Troubleshooting FAQ If you forget the password, you shall reset the DVR to  Check if 3 Smart Viewer users are in connection with DVR has problem. DVR will not work in order to protectWorks for the shop where you bought the product  When you use DHCP/ADSLPPPoE for connection  Make sure that the external storage device installed is  Make sure that the additional external HDD installed Preamble Open Source License Report on the Product Appendix No Warranty Repair or Correction How to Apply These Terms to Your New Programs We protect your rights with a two-step method You must cause the whole of the work to SHR-5162Eng.indb 2007-06-18 ｿﾀﾀ・115043 Executable License, or at your option any later version How to Apply These Terms to Your New LibrariesFoundation Loss of USE, DATA, or Profits or Business Interruption OpenSSL License This Software is Provided by Eric Young ‘‘AS IS’’