Samsung SPD-2200 manual Accessories, Getting started, ※Options, Speed Dome Camera

Getting started

It is necessary to connect the terminating resistance to the two units that are furthermost from the relevant camera/controller on the RS-485 Interface in order to prevent signal attenuation.

Since cameras have embedded terminating resistance, select whether to activate or deactivate their terminating resistance by using the DIP Switch. Refer to the connection layout below for deciding which unit is to be connected to the terminating resistance. Set the terminating resistance to the gray colored unit.

The maximum distance for setting the terminating resistance is 1.2Km.

Accessories	ENGLISH
User’s manual	Template

		3 fixing screws
Installation Bracket		1cable lock screw	Safety wire
※Options
The components below are options
Component	Model	Description
Camera Controller	SCC-16, SCC-3000	Pan/Tilt/Zoom/Focus Control, OSD Action, a variety of function settings
Indoor Housing	STH-160PI	Housing for Indoor Installation
Indoor Embedded Housing	STH-128PE	Ceiling Embedded Indoor Housing
Outdoor Housing	STH-160PO	Housing (with built-in fan and heater) for outdoor installation
Wall mounted	STB-270PW	Wall mounted type
Ceiling mounted	STB-496PP	Ceiling mounted type
AC Adapter	STA-110	Input : AC 110V
	STA-230	Input : AC 230V

18 SPEED DOME CAMERA SPEED DOME CAMERA 19