Camera setting
| OSD Setting |
| |
|
| Camera ID | ON |
|
| ||
|
| Camera Name |
|
|
|
| |
|
| Preset Number | ON |
|
| ||
|
| Preset Name |
|
|
|
| |
|
| Sequence Status | ON |
|
| ||
|
| Area Name | OFF |
|
| ||
|
|
|
|
⑤Sequence Status
Sets the sequence groups
5) Alarm Setting
Alarm Setting Menu
Alarm Setting |
| |
|
|
|
| Alarm Enable | OFF |
| ||
| Alarm Input |
|
|
| |
Alarm Out
Motion Detection
①Alarm Enable
To determine whether to activate the alarm, set to Alarm Enable. ·ON/OFF
The alarm is activated with ON.
ENGLISH
OSD Setting |
| |
| Camera ID | ON |
| ||
| Camera Name |
|
|
| |
| Preset Number | ON |
| ||
| Preset Name |
|
|
| |
| Sequence Status | ON |
| ||
Alarm Setting
Alarm Enable OFF
Alarm Input
Alarm Out
Motion Detection
Press the Enter key
Alarm In[Mode P P/G/T No INPUT1 OFF 1 OFF ***
INPUT2 OFF 1 OFF ***
INPUT3 OFF 1 OFF ***
INPUT4 OFF 1 OFF ***
Area Name | OFF |
|
|
⑥Area Name
Sets the area names
✽ With the area name off, the area can’t be displayed.
②Alarm Input
Sets the Alarm Input Mode, Priority and Alarm Activation Method
·NC/NO/OFF
Selects NC, NO or OFF depending on the alarm sensor types.
·1~4 (Priority)
Sets the priority of four alarm inputs and reacts to the alarm input in accordance with the priority.
·Preset/Group/Tour Number
Sets the Preset, Group or Tour for reaction to the alarm input.
In case of alarm, moves to the Preset/Group/Tour/Off corresponding to each alarm. If there are several alarms in sequence, stays in the Preset/Group/ Tour position during the Dwell Time according to the input sequence. The pattern- linked alarm then carries out the relevant pattern motion in sequence.
46 | SPEED DOME CAMERA | SPEED DOME CAMERA | 47 |
|
|
|
|
