How to Install
Accessories (option)
●Cautions
-Confirm that the installation location is strong enough to bear more than 4 times the total weight of the assembly and the speed dome camera
-Only install the camera where there is more than 500mm of space above the ceiling board.
-In installing the bracket, use the installation guide template, screws and cables supplied with the camera.
-There is a risk that the camera may be dropped during installation. Prevent any possibility of the camera falling by using the security cable during installation. Unauthorized persons should be prevented from gaining access to the installation site.
●Options related to installation
The options below, when purchased, will facilitate the installation in a variety of different sites.
1)Indoor embedded Housing
This housing is used when a speed dome camera is embedded in a double ceiling.
2)Indoor and Outdoor Housing
This housing is used when a speed dome camera is mounted on a wall or ceiling inside or outside.
4) Wall Mounting
Assembly used when an indoor and outdoor housing for a speed dome camera is to be mounted on a wall. | ENGLISH |
|
5)Ceiling Mounting
Assembly used when an indoor and outdoor housing for a speed dome camera is to be mounted on a concrete ceiling.
Cautions
·When installing the speed dome camera in an indoor/outdoor housing, remove the dome cover (front glass) to obtain a clearer image.
22 | SPEED DOME CAMERA | SPEED DOME CAMERA | 23 |
|
|
|
|
