Camera setting
Sequence Setting
Set Preset
Pan | Swing |
| |
Tilt | Swing |
| |
Swing | Focus Mode MANUAL | ||
Group | SEQ |
| |
|
| ||
Tour SEQ |
|
| |
PTZ | Trace |
| |
Power | On Resume | OFF | |
⑥Tour
Press the Enter key
Tour SEQ
Setting
Execute
Clear
Sequence Setting
Set Preset
Pan | Swing |
| |
Tilt | Swing |
| |
Swing | Focus Mode MANUAL | ||
Group | SEQ |
| |
Tour | SEQ |
| |
|
|
| |
PTZ Trace |
| ||
Power On Resume | OFF | ||
⑦PTZ Trace
Press the Enter key
PTZ Trace
Replay
Memorize
ENGLISH
Memorizes and plays the manual control routes (Pan, Tilt, Zoom and Focus)
Starts and sets Group monitoring and deletes the data.
•Setting
Selects the procedure for the registered Group Sequence with the joystick and sets it with the Enter key. If an unregistered number is designated, the number cannot be entered.
Completes the setting by pressing the Enter key on the selected position.
SPD is the speed the camera moves. (001~240°/sec)
DWL is the dwell time for the camera.(1~128 sec)
•Execute
Starts Group monitoring.
•Clear
Deletes the Group monitoring data.
•Replay
Repeatedly plays the manual control routes Stops it with the Stop key.
※If the control range is restricted to ① Pan Limit and ② Tilt Limit, the operation is not allowed beyond the controlled range. Exercise caution.
•Memorize
While the manual setting is memorized in the internal memory for at least 120 seconds after this function is activated, the memory time varies depending on the PTZ operation.
OVER means that the Memorize function is ended.
※When the control range is restricted to ① Pan Limit and ② Tilt Limit, it is memorized.
| Sequence Setting |
| |||
|
|
| Set Preset |
| |
|
|
|
| ||
|
|
| Pan | Swing |
|
|
|
|
| ||
|
|
| Tilt | Swing |
|
|
|
|
| ||
|
|
| Swing | Focus Mode MANUAL | |
|
|
| |||
|
|
| Group | SEQ |
|
|
|
|
| ||
|
|
| Tour | SEQ |
|
|
|
|
| ||
|
|
| PTZ | Trace |
|
|
|
|
| ||
|
| Power On Resume | OFF | ||
|
| ||||
|
|
|
|
|
|
⑧Power On Resume
When the power supply is resumed after suspension due to power failure, the Sequence operation set before the power failure is maintained.
38 | SPEED DOME CAMERA | SPEED DOME CAMERA | 39 |
|
|
|
|
