Camera setting
Camera Setting
Focus
White Balance
Exposure
Back Light
Sync
Brightness 050
Flickerless OFF
Others
Sync
Press the Enter key
Sync
Sync Mode Internal
Line Lock Phase 225
2) Sequence Setting
Sequence Setting
Set Preset
Pan | Swing |
|
Tilt | Swing |
|
Swing | Focus Mode MANUAL | |
Group | SEQ |
|
Tour | SEQ |
|
PTZ | Trace |
|
Power | On Resume | OFF |
Press the Enter key
Set Preset
Setting
Execute
Clear
Status
ENGLISH
Selects Internal synchronization/Line Lock. The default is Internal synchronization.
·Internal : Internal sync method
·Line Lock : The internal sync method is the
·Line Lock Phase : With the Line Lock, the phase can be adjusted from 0°to 360°. The default is 225°.
※For Internal, the Line Lock Phase cannot be adjusted.
Brightness
Sets video signal brightness on the screen.
①Set Preset
When users set their own chosen PAN/TILT positions or ZOOM and FOCUS, they can call frequently and monitor the status. Up to 128 positions can be preset. (1~128)
·Setting | : | Select the preset No. to set, adjust the PAN/TILT/ZOOM and press Enter. |
·Execute : | Select the preset No. to run, and the relevant camera starts running. | |
·Clear | : | Select the preset No. to clear, and the relevant setting is deleted. |
·Status | : | Displays the current preset No. |
Flickerless
Flickerless Mode
Sets the Flickerless Mode ON or OFF. Fluorescent tube flicker is eliminated.
Note
·D/N Mode is not activated when the Flickerless mode is ON.
Others
Sequence Setting
| Set Preset |
| ||
| Pan | Swing |
|
|
|
|
| ||
| Tilt | Swing |
| |
|
| |||
| Swing | Focus Mode MANUAL | ||
| ||||
| Group | SEQ |
| |
|
| |||
| Tour | SEQ |
| |
|
| |||
| PTZ | Trace |
| |
|
| |||
| Power | On Resume | OFF | |
|
Press the Enter key
Pan Swing
Setting
Execute
Clear
①Sharpness
Highlights image contour by increasing the Aperture Gain of the camera.
②Mirror
Reverses the video output signal from left to right and vice versa
③Nega/Posi
The video output signal is changed to positive or negative.
②Pan Swing
Activates and sets Swing monitoring in the Pan direction and deletes data
·Setting : Selects the preset swing position with the joystick and sets the position with the Enter key. SPD is the speed the camera moves.(001~240°/sec)
DWL is the dwell time for the camera.(1~128sec)
Completes the setting by pressing the Enter key on the selected position. ·Execute: Starts swing monitoring.
Stops it with the Stop key. ·Clear : Deletes the swing data
34 | SPEED DOME CAMERA | SPEED DOME CAMERA | 35 |
|
|
|
|