Samsung SPD-2200 manual Components, Connector Cable, Power Switch, Rotary Switch 2 SW2

Components

Front Panel

Connector Cable

Connect to the bracket connector for installation.

Back Panel ENGLISH

	Power Switch
Rotary Switch 2 (SW2)	Power on or off
	(※Factory default : OFF)
Camera ID address setting
switch.
Rotary Switch 1 (SW1)	DIP Switch (SW3)
	For setting each function
Camera ID address setting
	1.	For selecting a controller
switch.
	2.	For factory setting
	3.	For terminal setting
	4.	For terminal setting

Cautions

·If the Rotary Switch and DIP Switch (SW3) are not displayed, turn the power off and on again. Both switches will then be displayed.

Protocol Selection Switch

Video Out Terminal

AC 24V Out

Power LED

Controller In Terminal

ALARM Out

ALARM In

·Do not pull or hold onto the connector cables when moving or delivering the product. It may cause operational failure. ·See the inside of the door for settings for the switches on the main unit of the product.

Power In Terminal

10 SPEED DOME CAMERA SPEED DOME CAMERA 11