Samsung SSA-S2000W user manual To Specify the Operation Time of the Door Contact Sensor

basic setup

TO SPECIFY THE OPERATION TIME OF THE DOOR CONTACT SENSOR

The Door Contact sensor detects the opening of the door.

If the door is forcibly opened by an unregistered user, the Door Contact Sensor will perform the predefined alarm operation after the set time. (For setting the alarm operation time, refer to the alarm output for an input error of the Door Contact Sensor on page 31.)

1. Present the Master Card to the device.

2. Press Button 8 and Button 1 in sequence and press ENT .

3.Enter the two-digit operation time (unit: second) and press ENT .

•The default is set to “00” second, which means the Door Contact Sensor is disabled.

•You can specify from 01 to 99.

	X	Y	Z
		\	]
			`
tˆš›Œ™Gjˆ™‹	lzj	W	lu{
	iŒ““
			zzhTzYWWW
	X	Y	Z
	[	\	]
	^	_	`
	lzj	W	lu{
	iŒ““
			zzhTzYWWW

TO SPECIFY THE LIMITED TIME FOR THE KEYPAD INPUT

When it passes a certain time during your setting using the keypad , all your settings will be ignored and return to the initial state.

Specify the delay time between the input of the last key and restoring the previous state.

1.Present the Master Card to the device.

2. Press Button 8 and Button 3 in sequence and press ENT .

3.Enter the two-digit operation time (unit: second) and press ENT .

•The default is set to “20” second. You can specify from 10 to 99.

	X	Y	Z
		\	]
			`
tˆš›Œ™Gjˆ™‹	lzj	W	lu{
	iŒ““
			zzhTzYWWW
	X	Y	Z
	[	\	]
	^	_	`
	lzj	W	lu{
	iŒ““
			zzhTzYWWW

26_ Basic Setup