contents
PRODUCT INTRODUCTION | 6 | Features | |
6 | 7 | What’s included | |
8 | At a Glance | ||
| |||
| 9 | Cable Color Scheme | |
INSTALLATION AND EXTERNAL | 10 | Installing the rear template | |
CONNECTION | 11 | Cable Selection | |
10 | 12 | Bypass Diode Connection | |
12 | I/O Connection | ||
| |||
| 14 | External Reader Connection | |
INITIALIZATION | 15 | Basic Operations | |
15 | 16 | Wiegand Output Setup | |
16 | Initialization | ||
| |||
| 17 | Forced Initialization with External Line | |
| 17 | Hardware Forcible Initialization | |
READER MODE SETUP | 18 | Reader Mode Setup (RF ONLY) | |
18 | 19 | Reader Mode Setup (RF + P/W) | |
19 | Reader Mode Setup (PIN ONLY) | ||
| |||
| 20 | Reader Mode Setup (RF/PIN Combination | |
|
| Mode) | |
| 20 | Enabling Keypad Input for the Card Number | |
USER MANAGEMENT | 21 | To register cards in RF ONLY mode | |
21 | 21 | RegIsterIng cards In a combInatIon oF RF | |
| and P/W modes | ||
|
| ||
| 22 | to regIster cards In PIn mode | |
| 22 | regIsterIng cards In rF card / PIn combInatIon | |
|
| mode | |
| 23 | to delete a regIstered card or PIn number | |
BASIC SETUP | 24 | Duress Alarm | |
24 | 24 | To specify the retry count for an unregistered | |
| ID | ||
|
| ||
| 25 | To specify the keypad input suspension time | |
|
| if the retry count with an unregistered ID | |
|
| exceeds the limit | |
| 25 | To specify the delayed start time in Secure | |
|
| mode | |
| 26 | To specify the operation time of the Door | |
|
| Contact Sensor | |
| 26 | To specify the limited time for the keypad | |
|
| input | |
| 27 | To specify the alarm output port for the | |
|
| dismantled device | |
| 27 | To open or close the entry door | |
| 28 | To set or release the QUICK mode | |
| 28 | To set or release the Toggle mode for the | |
|
| door relay | |
| 29 | To specify the output time if the card is | |
|
| authenticated |
4_ Contents
