Closing the e-Manual

To close the e-Manual, press and hold the RETURN button or select at the upper-right corner of the screen or press EXIT button.

Jumping to a Menu Item

To directly jump to the menu item that is described in the current section, select Try Now . It is possible to jump from a menu item directly to the related section in the e-Manual. If you want to read an e-Manual entry on a specific screen menu feature, press the virtual remote panel's or the regular remote's E-MANUALbutton to load the corresponding e-Manual page.

This feature may not be available, depending on the menu.

Updating the e-Manual

Open the Smart Hub and select Apps, and then select More Apps. The e-Manual can be updated in the same way with an application update.

On the More Apps screen, select Apps to update, and then select e-Manual from the list. The e-Manual starts updating to the latest version. However, Apps to update appears on the screen only when the update is required.

Connecting to a Network

Connecting the Smart TV to a network gives you access to online services such as the Smart Hub, as well as software updates.

Network Connection - Wireless

Connect the TV to the Internet using a standard router or modem.

Wireless IP Router or Modem

that has a DHCP Server

The LAN Port on the Wall

LAN Cable (Not Supplied)

Wireless Network Precautions

•• This Smart TV supports the IEEE 802.11a/b/g /n communication protocols. Samsung recommends using IEEE 802.11n. Otherwise when you play video over a network connection, the video may not play smoothly.

•• To use a wireless network, the TV must be connected to a wireless router or modem. If the wireless router supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network.

•• Select a channel that is not currently in use for the wireless router. If the channel set for the wireless router is currently being used by another device, the result is usually interference and/or a communications failure.

•• Most wireless networks have an optional security system. To enable a wireless network's security system, you need to create a security key using characters and numbers. This security key is then needed to connect to the wireless network.

English - 14

[UF8000-XH]BN68-04794D-06L16.indb 14

 

 

2013-10-29 ￿￿ 10:04:37