Samsung DVD-V4800 instruction manual Tracking, Auto Play, VHS Playback

Tracking

The Tracking adjustment removes the white lines that sometimes appear during playback because of slight differences in recording decks. The TRK button will automatically align the recorded tracks with the playback heads to solve this problem. You may also set tracking manually.

1Adjust Tracking Manually

During playback, press the CH/TRK / buttons to remove white lines from the picture.

Auto Play

If you want your videotapes to play automatically when you insert them, turn on Auto Play.

NOTE: Only tapes that are missing the Record Safety Tab will play automatically when inserted.

1Open the “MENU”

With the VCR in Stop or Play mode, press the MENU button.

2Select “VCR”

Using the UP/DOWN buttons, move the selection bar to “VCR” then press ENTER to select.

3Select “Tape Length”

Press the RIGHT button to select the Tape Length. This information is usually printed on the tape box. The menu cycles through: T-120, T-160 or T-180.

Once the type of cassette is set, the VCR can display the amount of time remaining on the tape when you press the INFO. button.

	T-120
n	T-160
	T-180

4Select “Auto Play”

Move the selection bar to “Auto Play,” then press right button to select from the following options:

•On - The VCR will automatically begin playing a video tape when it is inserted, as long as the safety tab of the cassette has been removed.

•Off - Auto play is disabled.

n	On
	Off

5Select “Auto Repeat”

Move the selection bar to “ Auto Repeat”. It sets the VCR to play a tape repeatedly [unless a tape control is activated (stop, fast forward or rewind)].

n

Off

On

S-VHS Playback

The DVD-VCR allows you to playback high quality S-VHS tapes.

1Insert a S-VHS Tape

Insert an S-VHS tape into the VCR deck.

2Start Playback

Press ll(PLAY/PAUSE) on the remote control to begin playback of the S-VHS tape.

ENG-29