ENG-13
Manual Clock Set
If Auto Setup fails to set the DVD-VCR’s internal clock
by locating a local TVstation, follow these steps to set
the date and time manually.
NOTE: For accurate Timer Recording, your DVD-VCR's
internal clock must be set correctly.
1 Open “MENU”
Press the MENU button while the DVD is in Stop or
Play mode.
2 Select “SETUP”
Using the UP/DOWN buttons, move the selection
bar to “SETUP” then press ENTER to select.
3 Select “Clock”
Use the UP/DOWN buttons to highlight “Clock”
then press the ENTER button.
4 Select “Manual Clock”
Move the highlight to “Manual Clock”, then press
the ENTER button.
• The Clock Set/Adjust menu will change as shown.
5 Set the Clock
Use the LEFT/RIGHTbuttons to select each of the
following options, then use the UP/DOWN buttons
to set each option:
•Hour– Set the hour •Month – Set the month.
•Minute– Set the minute. • Day – Set the day.
•Year– Set the year
6 Confirm Settings
Press the ENTER or RETURN button to confirm
your clock settings and to return to theClock
Set/Adjust.
• Press the RETURN button three times to exit the
menu.
Language : English
Front Display : Auto
Auto Power Off : Off
Manual Clock
2004 THU
Tuner Band Setting
This feature allows you to manually set the DVD-VCR’s
tuner band to Antenna or Cable, whichever you
connected to the Antenna In jack during initial setup.
• Use this setting only if Auto Setup detected the
incorrect tuner band, i.e. channels are coming in on
the wrong channel numbers.
1 Open “MENU”
With the DVD in Stop or Play mode, press the
MENU button.
2 Select “SETUP”
Using the UP/DOWN buttons, move the selection
bar to “SETUP” then press ENTER to select.
3 Select “Channel”
Using the UP/DOWN buttons, move the selection
bar to “Channel”, then press ENTER to select.
4 Select “Ant./Cable”
Move the selection arrow to “Ant./Cable” then press
RIGHTbutton to select from the following options:
• Antenna - Select this if the DVD-VCR is
connected to an indoor or outdoor VHF/UHF
antenna.
• Cable TV - Select this if the DVD-VCR is
connected to Cable TV.
Language : English
Front Display : Auto
Auto Power Off : Off
Ant./Cable : Antenna
RF Output CH : 3CH
Auto Channel Memory
Channel Add/Delete
Cable TV
Antenna