Sansui TV19PL120DVD Audio lead not supplied, Video lead not supplied, To COMPONENT IN, Enter

Connection to other equipment

Note:

¥The Component Video inputs on this unit can accept both interlaced signals (PAL: 576i/1080i or NTSC: 480i/1080i) and progressive signals (PAL: 576p/720p or NTSC: 480p/720p).

SETUP menu

AUTO TUNING

MANUAL TUNING

CH ALLOCATION

LANGUAGE

ENGLISH

5

Connecting to a DVD player or other AV device with Component Video outputs

TV (Back side view)

DVB-T DIGITAL COMPONENT
AUDIO
OUT	Y
OUT		Audio lead (not supplied)
Pb	Pr
L	R	Video lead (not supplied)
IN
(MONO)	AUDIO
		To COMPONENT IN
		Component output Y Pb Pr	Audio output

If your DVD player (or other device) has Component Video output sockets, use a suitable set of leads (RCA/Phono) to connect these to the Component Video inputs on this TV as shown - it can greatly enhance the picture quality and performance. Please remember that you will also need to connect separate leads (RCA/Phono) for the audio signals. To view this source, select the COMPONENT input mode (see page 4).

VERTICAL POSITION 0

AUTO 4:3 DEFAULT

16:9

EXIT : END MENU: RETURN

6

Selecting the setting for the SCART socket

1Press ANALOG MENU, the menu will appear on

the screen. Press B or A to select (SETUP) menu. Press C or D to select AV1 OUTPUT, then press

ENTER.

2Press B or A to select TV or MONITOR, then press

ENTER.

TV: Outputs the last channel position selected on RF.

MONITOR: Shows the picture displayed on the TV- screen.

3Press EXIT to return to the normal screen.

	AV1 OUTPUT	TV
	AV COLOUR	AUTO
	REC SCREEN STATUS
		OFF
		TV
EXIT : END		MENU: RETURN

6

50A0201A_p04-09.p65 6 9/12/07, 4:54 PM