Sansui TV19PL120DVD instruction manual PC Connection, Select PC input, Monitor Display modes

PC Connection

Use a PC-VGA lead (not supplied) to connect your PC to this unit. Plug the lead carefully not to break or bend the contact inside of plug.

TV

(Back side view)

PCs are usually sup- plied with a ‘normal’ CRT monitor (Cathode Ray Tube).

PC/HDMI	PC MONITOR
AUDIO

to AUDIO 1 input

VGA lead

(not supplied)

Audio lead (not supplied)

Select PC input

Press INPUT SELECT and press C or D to select PC, then press ENTER. PC appears on the TV screen.

PC

￿￿

Before you connect this unit to your PC, change the adjustment of your PC’s graphic card. Otherwise the picture may not appear cor- rectly on the unit. Turn on your PC (still with your old Monitor) and select under 1360 x 768 for on-screen graphic resolution. Select under 60 Hz for on-screen refresh rate. Switch off your PC, then connect it to this unit while both items are still switched off.

Note:

Note:

¥If there is no video signal from the computer when the unit is in PC mode, ÔNO SIGNALÕ will appear on the TV-screen.

¥See next page for PC mode menu.

Monitor Display modes
MODE	Resolution	Refresh rate
VGA	640x480	60Hz
VGA	720x400	70Hz
SVGA	800x600	60Hz
XGA	1024x768	60Hz
WXGA	1280x720	60Hz
WXGA	1280x768	60Hz
WXGA	1360x768	60Hz

(according to Graphic card)

¥Digital PC-connection via HDMI input is not supported. If you try to connect your PC digitally anyway, the TV- operation might freeze. TV will stop to respond prop- erly on usercommands.

Countermeasure: Switch-off your TV and disconnect from the 220~240V-power-supply. Disconnect the digital PC- connection.

Now you may retry operat- ing your TV.

¥If a digital PC-connection does show a picture, proper working is not guaranteed. Digital PCconnection is not granted for this TV.

7

50A0201A_p04-09.p65 7 9/12/07, 4:54 PM