Sansui TV19PL120DVD instruction manual Parental, Password, If you forget the password

Customizing The Function Settings

Note:

¥If each setup (pages 48 ~ 50) has been completed, the unit can always work under the same condition (especially with DVD discs).

Each setup will be retained in the memory even if you turn the power off.

Parental

Some discs are specified as not suitable for children. Such discs can be limited not to playback with the unit.

1)Press ▲ or ▼ to select ÒParentalÓ, then press ENTER. ÒEnter PasswordÓ screen will appear.

2)Press Ò0000Ó using Number buttons (0–9). (Please note, this is pre-setting password of this unit). Then press ENTER. The parental level list

will appear.

¥Level 1: DVD software for adults cannot be played back.

¥Level 8: Virtually all DVD software can be played back.

¥Level Off: The parental control setting does not function.

3)Press ▲ or ▼ to select from the level 1 to level 8. The limitation will be more severe as the level number is lower. Then press ENTER.

4)Press to activate Parental control setting.

Note:

¥Depending on the discs, the unit cannot limit playback.

¥Some discs may not be encoded with specific rating level information though its disc jacket says Òadult.Ó For those discs, the age restriction will notwork.

¥The password is required every time when you change the parental level.

¥If you input a wrong number, press CANCEL.

Password

1)Press ▲ or ▼ to select ÒPasswordÓ, then press ENTER. ÒEnter Current PasswordÓ screen will appear.

2)Press Number buttons (0–9)to input the current password (If the password has not been set yet after you purchase this unit, it is Ò0000Ó).

3)Then press ENTER. ÒEnter New PasswordÓ screen will appear. Press Number buttons (0–9)to input the new password.

4)Press ENTER. Now your new password has been set. Be sure to remember this number!

If you forget the password.

1)Press to remove the disc.

2)While holding 7 down on the remote control and at the same time press STOP (DVD) on the top panel. ÒPassword ClearÓ appears on the screen. Now the password has been returned to the initial value (Ò0000Ó).

50

50A0201A_p50-Back.p65 50 9/12/07, 5:00 PM