Sansui TV19PL120DVD Adjusting the Nicam stereo sound, Audio menu, Nicam 2-channel sound reception

ÔNICAM M1Õ illuminates for approx. 4 seconds when a NICAM MONO A broadcast signal is received.

ÔNICAM M1/M2Õ illuminates for approx. 4 seconds when a NICAM MONO A and MONO B broadcast signal is received.

This will be displayed for approx. 4 seconds when ÔNICAM OFFÕ is selected in the menu screen.

Stereo reception

ÔSTEREOÕ illuminates for approx. 4 seconds when a STEREO broadcast signal is received.

Adjusting the Nicam stereo sound

ÔNICAM STÕ illuminates for approx. 4 seconds when a NICAM STEREO broadcast signal is received.

Adjusting the NICAM stereo sound

NICAM stereo sound reception:

The built-in tuner can receive and distinguish NICAM Stereo broadcasts automatically, provided the NICAM setting in the menu is set to ‘AUTO’.

Note:

1

Press ANALOG MENU, the menu will appear on the screen.

Press B or A to select (AUDIO) menu.

Press C or D to select NICAM, then press ENTER. Press B or A to select AUTO or OFF.

Select OFF if you want to revert to standard mono FM audio reception.

NICAM	AUTO
BASS	25
TREBLE	25
BALANCE	0
HDMI AUDIO	HDMI

RESET
	AUTO
EXIT : END	MENU: RETURN

¥Sometimes if reception is poor, the NICAM stereo sound may not be received correctly. In case of 2 channel sound reception, you can select the desired sound with AUDIO.

AUDIO menu

	NICAM	AUTO
	BASS	25
	TREBLE	25
	BALANCE	0
	HDMI AUDIO	HDMI
	RESET
EXIT : END		MENU: RETURN

2

Press EXIT to return to the normal screen.

When NICAM reception is available, one of the following indications will be displayed￿￿￿￿￿￿.￿

￿￿￿￿￿￿￿

N I C A M M 1 / M 2

￿￿￿￿￿￿￿￿

￿￿￿￿￿￿

Pressing AUDIO alternates between the two different audio channels (when applicable).

NICAM 2-channel sound reception

S O U N D 1 / 2

S O U N D 1 / 2

16

50A0201A_p16-19.p65 16 9/12/07, 4:56 PM