Sanyo DV-S100 manual Changing the Subtitle Language, Subtitle Language and press the enter button

Setup

Changing the Audio Language (2)

3	Use the up/down cursor buttons ( ,	) to select a desired
	language and press the enter button (	).

The setup screen reappears (with the “Audio Language” setting changed to the selected language).

Setup

Changing the Subtitle Language (1)

You can change the subtitle language of a DVD. You can also remove subtitles.

Cursor buttons

Enter button

Set up
	DVD Menu Language	English
	Audio Language	Chinese
	Subtitle Language	Original
	Digital Output	LPCM
	Display	16 : 9 Widescreen
	Parental	8
	OSD Message	On
	Player Language	English

“Chinese ” has been selected on the Audio Language setup screen.

	1	Follow steps	1	and		2		in “Performing Basic Operations for
		Setup Changes” (			z		see page 25) to display the setup screen.
2		Use the up/down cursor buttons ( , ) to select

Notes:

¡When set to “ Original ”, a disc is played in the original language on the disc. ¡The languages stored on discs vary. Some discs may contain only 1 language.

¡If a language not stored on a disc is selected, any language stored on the disc may be played.

¡Read the instructions included with the disc played.

¡The audio language can be switched using the DVD menu (zsee page 13) or the audio button (zsee page 17), but if power is disconnected and play is then begun again, play will occur in the language designated during setup.

*If the audio language is switched with the DVD menu or audio button, setup settings do not change.

*When a disc is played after setup settings are changed, the disc is played from the beginning. If you wish to switch the audio language during disc play, use the audio button.

“ Subtitle Language ” and press the enter button ( ).

The subtitle language setup screen is displayed.

	Subtitle Language
The current setting is	Original	French

the language with a	Japanese	German
yellow background.
	English	Korean
	Chinese	Off
	Italian

28