Sanyo DV-S100 manual Switching Between OSD Message Display and Non-Display

Setup

Changing Parental Settings (5)

6	Input the password input in step			5	.
	A message screen is displayed.
		Change password
			Password has been changed.
			This password is necessary
			when you change parental setting.
			Please remember this password.
			Please press “Enter” key.

5 Press the enter button ( ).

The parental menu screen reappears.

To return to the setup screen, press the return button ( ) or the left

cursor button ( ).

When setup changes are complete, press the setup button ( ).

The screen with “ ” reappears. Press the play button ( ) to begin play.

Note:

A password can also be input by using the left/right cursor buttons ( , ) to select numbers at the bottom of the screen and then pressing the enter button

( ).

Setup

Switching Between OSD Message Display and Non-Display (1)

You can switch between display (On) or non-display (Off) of indicators

(for example, , , – – – – , – – – – , ) displayed when buttons

are pressed during DVD or video CD play.

Cursor buttons

Enter button

1	Follow steps		1	and	2		in “Performing Basic Operations for
				z		see page 25) to display the setup screen.
	Setup Changes” (
2	Use the up/down cursor buttons ( , ) to select
	“			” and press the enter button ( ).
		OSD Message

The OSD Message setup screen is displayed.

OSD Message

On	The current setting is
	the one with a yellow
Off
	background.

35