Installation (3)

Procedure for installation (Suspended position)

Installation of Remote control sensor

1

¡Confirm that the built-in antivibration boards on both the left and right sides are set to the horizontal installation position “H”.

¡Attach Small bracket (L) and Small bracket (R) to the changer using the hexagonal bolts (M5 x 8).

 

H

Built-in anti-vibration

H

45°

board position

45°

V

V

 

 

Hexagonal bolts

H 45°

V

H 45°

V

Using the velcro tape, install the Remote control sensor in a location that will not obstruct driving.

Remote

Velcro tape

control

 

sensor

 

Notes:

 

 

Hexagonal

 

 

bolts

 

 

 

 

 

 

 

 

 

 

2

¡Determine the mounting location

3

 

¡Attach the changer with the tapping

 

 

 

 

and drill four mounting holes.

 

 

screws (M5 x 12).

 

 

 

 

3.6ø

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

¡Before applying the Velcro tape, use the included cleaning cloth to wipe the surface where the tape will be applied, then dry it completely.

¡If necessary, secure the remote control sensor cord with the cord clip supplied.

Installation of FM modulator

Using the velcro tape, install the FM modulator to the floor or other surface.

FM modulator

Velcro tape

Remote control

sensor

FM Modulator

42

Page 43
Image 43
Sanyo DV-S100 manual Installation of FM modulator