Sanyo DV-S100 manual Built-in anti-vibration

Installation (2)

Procedure for installation on carpet (Vertical position)

Procedure for installation on carpet (At a 45° angle)

1

¡Set the built-in anti-vibration boards on both the left and right sides to the vertical installation position “V”.

¡Attach Large bracket (L) and Large bracket (R) to the changer using the hexagonal bolts (M5 x 8).

¡Attach Large brackets (L) and (R) to their respective brackets (B) using the hexagonal bolts (M6 x 20) and the hexagonal nuts (M6).

45° V

H

°45 H

V

Built-in anti-vibration board position

Hexagonal bolts (M6 x 20)

Hexagonal bolts

(M5 x 8)

V	45°
	H

V

°45

H

1

¡Set the built-in anti-vibration boards on both the left and right sides to the 45° installation position “45°”.

¡Attach Large bracket (L) and Large bracket (R) to the changer using the hexagonal bolts (M5 x 8).

¡Attach Large brackets (L) and (R) to their respective brackets (B) using the hexagonal bolts (M6 x 20) and the hexagonal nuts (M6).

		H	°	V	Built-in anti-vibration	V45	H
			45		board position	°
H	°	V					45		H
	45						V	°

Hexagonal bolts (M6 x 20)

Hexagonal bolts

(M5 x 8)

2

¡Pull back the carpet and determine where to attach the changer.

¡Stick the supplied double-sided tape to the bottom of the brackets

(B) and peel off the paper backing. ¡Affix the changer to the floor by

pressing in place.

3

¡Remove the hexagonal nuts and take off the changer.

2

¡Pull back the carpet and determine where to attach the changer.

¡Stick the supplied double-sided tape to the bottom of the brackets

(B) and peel off the paper backing. ¡Affix the changer to the floor by

pressing in place.

3

¡Remove the hexagonal nuts and take off the changer.

4	¡Using a knife, cut “X”s in the carpet	5	¡Once more, use the hexagonal nuts to
	directly above the brackets (B)		attach the changer on top of the carpet.
	bolts.
	¡Return the carpet to its original
	position allowing the bolts to stick
	through.

4	¡Using a knife, cut “X”s in the carpet	5	¡Once more, use the hexagonal nuts
	directly above the brackets (B)		to attach the changer on top of the
	bolts.		carpet.
	¡Return the carpet to its original
	position allowing the bolts to stick
	through.

41