Using Voice-Activated Dialing

In addition to PCS Voice CommandSM (see page 174), you can use a Voice Dial tag to automatically dial a phone number in your Contacts directory. Your phone can store up to 30 Voice Dial tags.

To use a Voice Dial tag to call a phone number:

With the Flip Open:

1.Press or briefly.

2.Follow the voice prompts and recite the entry’s Voice Dial tag into your phone’s microphone.

With the Flip Closed:

1.Press and hold .

2.Follow the voice prompts and recite the entry’s Voice Dial tag.

Note: To use the Voice Dial function, you must have stored entries for Voice Dial (see “Programming a Voice Dial Tag to Your Phone” on this page).

Programming a Voice Dial Tag to Your Phone

To program a voice dial tag:

1.Press to access the main menu.

2.Select Voice Services and press .

3.Select Voice Dial and press .

4.Select Program and press .

5.The phone will prompt you to say the name you want to program. Wait for the beep and then say the name.

6.Respond to the prompt by repeating the name after the beep.

7.Enter or highlight the entry (name) in the Contacts list and

press .

8.Select the desired phone number and press . (The Display shows “Voice Dial Recorded”.)

Note: Record Voice Dial tags in a quiet environment and without the aid of an accessory (for example, a headset or hands-free car kit).

Section 2: Understanding Your PCS Phone

2I: Using Your Phone’s Voice Services

120

Page 131
Image 131
Sanyo RL2500 manual Using Voice-Activated Dialing, Programming a Voice Dial Tag to Your Phone