Setting Up Screen Call

This feature enables you to screen incoming calls by using recorded announcements, either one that comes pre-recorded on your phone or one that you record. You can also record the caller’s message into the Voice Memo list. To listen to the message, see “Reviewing Voice Memos” on page 123.

Activating Screen Call

To start Screen Call when you have incoming calls:

1.Press to display the options.

2.Highlight Screen Call and press . To set Auto Screen Call:

1.Press to access the main menu.

2.Select Voice Services and press .

3.Select Screen Call and press .

4.Select Auto and press .

5.Select On and press .

6.Set the answering time by using numeric keys or / on the Navigation key.

7.Press or OK (left softkey). (The icon is displayed on the standby display.)

Tip: If a new caller’s message is waiting, appears on the display. The memos recorded while activating “Screen Call” are shown with “” or “!” icon in the list (“”: once played, “!”: not played yet).

Tip: While the caller’s is recording: Pressingstops recording and disconnects

the call. Pressing answers a call.

Section 2: Understanding Your PCS Phone

2I: Using Your Phone’s Voice Services

125

Page 136
Image 136
Sanyo RL2500 manual Setting Up Screen Call, Activating Screen Call