Setting Abbreviated Dialing

Abbreviated Dialing is another form of speed dialing. It allows you to dial a number from your Contacts entries by entering just the last four digits of the number. If the digits you enter do not match any stored Contacts entry, you can automatically prepend an area code and prefix using the following steps.

To activate this feature:

1.Press to access the main menu.

2.Select Settings and press .

3.Select Others and press .

4.Select Abbrev. Dial and press .

5.Select Enable and press .

6.Enter a six-digit number and press or OK (left softkey).

To deactivate this feature, highlight Disable during step 5 above.

Tip: If you enter fewer than 6 digits, the display shows a warning message. See page 25 for using this feature.

Headset Mode

This feature allows you hands-free phone use. Set the headset mode to Voice Call or Ready Link and press the Turbo Button on the headset to activate useful functions.

To set headset mode:

1.Press to access the main menu.

2.Select Settings and press .

3.Select Others and press .

4.Select Headset Mode and press .

5.Select Voice Call or Ready Link and press .

Press Info (right softkey) during step 5 above to see the Headset Mode information.

To deactivate this feature, select Off during step 5 above. With the headset:

Voice Call: Press the Turbo Button to activate Voice dial. Press twice to redial the last call. Press and hold the button to record a Voice Memo.

Ready Link: Press and hold the Turbo Button to redial the last PCS Ready Link call.

Section 2: Understanding Your PCS Phone

2B: Controlling Your Phone’s Settings

63

Page 74
Image 74
Sanyo RL2500 manual Setting Abbreviated Dialing, Headset Mode, Select Voice Call or Ready Link and press