Sanyo RL2500 manual Prepending a Phone Number From a Message

3.Highlight the number you wish to extract.

4.Press to display the options.

5.To select an option, highlight it and press .

Call to dial the phone number.

Call:Speaker On to dial the phone number in speakerphone mode.

Save Phone# to save the phone number if it is not already in your Contacts list. If the phone number has already been stored in a Contacts entry, Go to Phone Book appears instead of Save Phone#.

Display Phone# to display the phone number.

Prepend to add numbers to the beginning of the phone number.

Note: Press and hold during step 4 above to start a PCS Ready Link call if the extracted number is 10 digits ( or 11 digits beginning with 1).

Prepending a Phone Number From a Message

After you display a Message, press to display message options.

To prepend an area code to an extracted number if you happen to be outside your local area code and need to add a prefix:

1.Highlight Prepend and press .

2.Enter the digits or pauses (see below) you want to add to the

number. If you want to save the number, press and select the Save Phone# option. If not, the changes only apply to the current call.

3.To select an option, highlight it and press .

Call to dial the phone number.

Call:Speaker On to dial the phone number in speakerphone mode.

Save Phone# to store the phone number in your Contacts Directory.

H Hard Pause to insert a hard pause. (See “Dialing and Saving Phone Numbers With Pauses” on page 24.)

T 2-Sec. Pause to insert a 2-second pause. (See “Dialing and Saving Phone Numbers With Pauses” on page 24.)

Section 3: Using PCS Service Features

3B: PCS Vision 148