Sanyo RL2500 manual Message Options, Extracting Phone Numbers From a Message

Message Options

After you display a Message, press to display message options.

To select an option, highlight it and press .

Call Back to dial the phone number of the sender (if applicable).

Call:Speaker On to dial the phone number of the sender in speakerphone mode (if applicable).

Save Phone# to save the sender’s phone number if it is not already in your Contacts list (if applicable). If the sender’s phone number has already been stored in the any Contacts entry, Go to Phone Book appears instead of Save Phone#.

Prepend to add numbers to the beginning of the phone number (if applicable). (See “Prepending a Phone Number From a Message” on page 148.)

Extract Info to extract phone numbers, email, or Web addresses (if there are numbers or addresses contained in the text message). (See below on this page and page 149.)

Erase to erase the message.

Add Folder to add a folder. (See “Adding a Folder for Messages” on page 151.)

Move Message to move the message into another folder. (See “Moving a Message Into Another Folder” on page 151.)

Font Size to adjust the font size depending on your preference. (See “Changing the Displaying Font Size of a Message” on page 146.)

Note: If the incoming message does not have a call back number, “Call Back,” “Call:Speaker On,” “Go to Phone Book/Save Phone#,” and “Prepend” are not shown.

Extracting Phone Numbers From a Message

After you display a Message, press to display message options.

To extract a phone number contained in the message:

1.Highlight Extract Info and press .

2.Highlight Phone# and press . All the phone numbers contained in the message are displayed. (If there are no phone numbers to extract from the message, the numbers are not displayed.)

Section 3: Using PCS Service Features

3B: PCS Vision 147