To add or replace a special number:

1.Select > Tools > Parental Ctrl.

2.Enter your lock code to display the Parental Control menu.

3.Select Special #s.

4.Select a field for your entry and press .

5.Enter the number and press .

To edit Contacts:

You can also edit Contacts from the Parental Control menu while any Limit Use feature (except Allow All) is enabled. You are required to enter your lock code once to access the Parental Control menu. However, as long as you have not gone back to the main menu or standby mode, you are not required to enter your lock code each time you edit your Contacts.

1.Select > Tools > Parental Ctrl.

2.Enter your lock code to display the Parental Control menu.

3.Select Edit Contacts.

Note: Regardless of whether you set Lock Services, Change Lock, or Limit Use from the Security menu or from the Parental Control menu, the most recent setting takes precedence.

Tip: The lock code for both the Security and Parental Control settings is the same.

52

Page 60
Image 60
Sanyo S1 manual Select Special #s, Select Edit Contacts