Sanyo S1 manual Making a 10-4 Call 1-to-1 Call

Making a 10-4 Call (1-to-1 Call)

You can place a 1-to-1 10-4 call by selecting a Contacts entry from the 10-4 List.

1.Press 10-4(left softkey) or to access the 10-4 List.

2.Press Go to (left softkey), and select the list from which you want to place a call (Company List, Personal List, 10-4 Outgoing, 10-4 Incoming, or 10-4 Missed) and press .

Tip: You can also select Enter 10-4#from Go to option to enter a 10-4 number directly. See page 85 for details.

3.Highlight the Contacts entry you want to call, and press and

hold to place the call and get the floor. (You will see

10-4 calling... and Connecting... followed by “You have floor.” You can now begin speaking.)

– or –

Highlight the Contacts entry you want to call and press and

release to place the call. (The call will connect as described above, but “Floor is open.” will appear on the screen

and either you or other party may press and hold to take the floor and speak.)

Note: During a 10-4 call, the “floor” is the right to speak. When you see

“Floor is open.”, the first person to press can speak (while holding the key). Only the person who has the floor can speak. The phone beeps if

you press when the other party has the floor.

4.Continue holding as you speak. When you finish

speaking, release to allow the other party to speak. (When the other party takes the floor, you will see the speaker’s name and phone number and the text “has floor.”)

5.When you are finished, press .

Note: When neither party has the floor during a 10-4 call, “Floor is open.” appears on the display. If no one takes the floor for 20 seconds, the 10-4 call ends automatically.

Tip: If you press or during step 3 above, you can make a standard voice call.

84