Receiving a 10-4 Call
1. Make sure your phone’s 10-4 mode is enabled (see “Setting
10-4 Mode”on page 82).
2. When you receive a 10-4 call from a Contacts entry,“10-4
Call,”the entry’s name,and the 10-4 number appear on the
display.
When you receive a group call,“Group Call”, group
member’s name,and the 10-4 number appear.
3. If the person placing the call has kept the floor (held the ),
you will see the entry name and 10-4 number along with
has floor.,”and you will hear the caller speaking.
4. When the caller finishes speaking and releases ,you will
see “Floor is open.”on the display screen. Press and hold
to take the floor and reply to the caller.(You will see
You have floor.”and hear a tone confirming that you may
speak.)
5. When the conversation is finished,press .
Note:You can change the volume and the speaker setting while a 10-4
call is activated. Volume:Adjust the voice volume by using or by
pressing the navigation key up or down (except when you are pressing
and holding ). Speaker:Switch the speaker on or off by
pressing .
87