Sanyo S1 manual Using Abbreviated Dialing

Using Abbreviated Dialing

Abbreviated Dialing is similar to speed dialing. You can use either of the following abbreviated dialing features.

⬤Contacts Match to retrieve any desired number saved in your Contacts by entering only the last three to six digits of the number.

⬤Prepend to predefine the first five- or six-digit prefix you wish to use for abbreviated dialing, so that you can dial a number by entering only the last four or five digits of the number.

Above feature becomes available when you enable Abbreviated Dialing feature. (See “Setting Abbreviated Dialing” on page 43.)

To place a call using abbreviated dialing:

1.Enter the last 3-6 digits of a Contacts entry’s phone number saved in your Contacts.

– or –

Enter the last four or five digits of your desired number to use the prepend feature.

2.Press or .

Note: If the digits match more than one entry, the Abbrev. Dial list will

be displayed; highlight the correct entry and press or again.

When Prepend is set to Enable and Contacts Match is set to Disable, you can display the 10-digit number (including the predefined prepend number) by entering the last four or five digits of the number.

When both Contacts Match and Prepend are set to Enable and your desired number is not saved in Contacts, you can display the 10-digit number (including the five- or six-digit prepend number) by entering the last four or five digits of the number.

21